Home /
Miscellaneous /
Accessories /
Terrariums Power Monitor AC Digital Display Metering Socket

Terrariums Power Monitor AC Digital Display Metering Socket

Availability: In stock

Rs1,250.00

Qty:

Add to Wishlist

Quick Overview

Terrariums Power Monitor AC Digital Display Metering Socket.
Type; Single phase electric energy meter
Basic current; 10A
Reference voltage; 220V
Display method; Number
Frequency; 50Hz）
Maximum current; 10A
Product Features:
Monitor active power, accumulated electricity, current RMS, voltage RMS, grid frequency, power factor.
Calculate the cumulative electricity consumption time, carbon dioxide emissions, electricity consumption amount (power-off memory)
Set the power overload power alarm threshold (power failure memory).
Customize the unit price of electricity (power off memory)
Clear the accumulated power, the time of power consumption, and the unit price of electricity (power-off memory)
Technical indicators; Applicable voltage: 220V, 50Hz.
Load upper limit: 2200W/10A
Body shell: flame retardant PC
Plug specifications: 5 plugs GB/nickel-plated pure copper
Application: Comply with the electrical equipment within the applicable voltage and load upper limit.

Terrariums Power Monitor AC Digital Display Metering Socket

Double click on above image to view full picture

More Views

Details

Instructions for use: 1. Switch the display content:Press "UP & DOWN" key to switch (forward and reverse cycle):Power, electricity, voltage, current, frequency, time, carbon dioxide, amount, power factor. Set overload alarm threshold, unit price of electricity bill, reset accumulated power, and reset accumulated time,Press and hold the "Settings" button for 3 seconds, the default is to enter the overload alarm power setting, and then short press the "Settings" button to switch to the unit price of electricity, the reset of the accumulated power, and the accumulated power.Time reset setting.Overload alarm settings:The screen displays "overload alarm", and the first digit flashes; Short press the "UP & DOWN" key to adjust the current digit value, short press the "OK" key to switch the digit.After adjusting to the desired value, press and hold the "OK" button for 3 seconds to save and exit the setting.Electricity unit price setting-The screen displays "amount", the setting method is the same as above;lThe accumulated power is reset to zero:The screen displays "Clear the accumulated power", the "UP & DOWN" key is invalid, long press the "OK" key for 3 seconds to save and exit the setting;The accumulated time is cleared: The screen displays "Cumulated time reset", the "UP & DOWN" key is invalid, long press the "OK" key for 3 seconds to save and exit the setting.Note:1. The overload alarm value should be lower than the maximum load power, otherwise the screen will display Err alarm, and it is forbidden to exit the setting;2. During the setting process, if there is no key operation within 10 seconds, the setting will automatically exit without saving the current modification;3. Restore factory settings: Press the "UP & DOWN" keys simultaneously for 3 seconds, "Clear" flashes 3 times, and the display is restored to the factory settings.